| Identification | More | [Name]
3-FLUOROCATECHOL | [CAS]
363-52-0 | [Synonyms]
1-FLUORO-2,3-DIHYDROXYBENZENE
3-FLUORO-1,2-DIHYDROXYBENZENE
3-FLUOROBENZENE-1,2-DIOL
3-FLUOROCATECHOL
3-Fluorocatechol,99%
1,2-Dihydroxy-3-fluoroBenzene
3-Fluorocatechol 99%
3-FLUOROCATECHOL 98+%
3-Fluoro-1,2-dihydroxybenzene, 98+%
3-Fluoro-1,2-benzenediol | [EINECS(EC#)]
609-233-8 | [Molecular Formula]
C6H5FO2 | [MDL Number]
MFCD00042582 | [Molecular Weight]
128.1 | [MOL File]
363-52-0.mol |
| Chemical Properties | Back Directory | [Appearance]
light beige to light brown-grey crystalline powder | [Melting point ]
71-73 °C (lit.) | [Boiling point ]
218.4±20.0 °C(Predicted) | [density ]
1.5140 | [storage temp. ]
Keep in dark place,Inert atmosphere,Room temperature | [solubility ]
Chloroform (Slightly), Methanol (Slightly) | [form ]
Crystalline Powder | [pka]
8.54±0.10(Predicted) | [color ]
Light beige to light brown-gray | [Sensitive ]
Light Sensitive | [BRN ]
2436074 | [InChI]
InChI=1S/C6H5FO2/c7-4-2-1-3-5(8)6(4)9/h1-3,8-9H | [InChIKey]
DXOSJQLIRGXWCF-UHFFFAOYSA-N | [SMILES]
C1(C(F)=CC=CC=1O)O | [CAS DataBase Reference]
363-52-0(CAS DataBase Reference) |
| Safety Data | Back Directory | [Hazard Codes ]
C,Xi | [Risk Statements ]
R20/21/22:Harmful by inhalation, in contact with skin and if swallowed .
R34:Causes burns. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S27:Take off immediately all contaminated clothing .
S28:After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer) .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . | [RIDADR ]
UN 3261 8/PG 2
| [WGK Germany ]
3
| [Hazard Note ]
Corrosive | [HazardClass ]
8 | [PackingGroup ]
III | [HS Code ]
29081990 |
| Hazard Information | Back Directory | [Chemical Properties]
light beige to light brown-grey crystalline powder | [Uses]
3-Fluorocatechol is a fluorinated catechol used in the preparation of synthetic humic acid as well as an intermediate in the preparation of 3-fluoroveratrole. | [Definition]
ChEBI: A catechol bearing an additional fluoro substituent at position 3. | [Synthesis]
The general procedure for the synthesis of 3-fluorocatechol from 2-fluorophenol was as follows: o-fluorophenol (20 g, 0.2 mol) was dissolved in acetonitrile (500 mL) dried over molecular sieves and stirred under argon protection. Anhydrous magnesium chloride (68 g, 0.72 mol) and triethylamine (150 mL, 1.08 mol) were then added and the mixture was observed to be exothermic. After stirring for 20 minutes, paraformaldehyde (42 g) was added and the reaction mixture was kept at 50 °C for 6 hours. The reaction process was monitored by thin layer chromatography (TLC) and it was found that there were still residues of raw materials, but the prolongation of the reaction time did not significantly change the results. Upon completion of the reaction, the mixture was cooled to room temperature and an aqueous sodium hydroxide solution (22.8 g of sodium hydroxide dissolved in 80 mL of water) was slowly added under ice water bath conditions. Then 30 wt% hydrogen peroxide (140 mL) was slowly added dropwise, taking care to control the reaction temperature below 50 °C to avoid intense exotherm. After the dropwise addition, the reaction mixture was continued to be stirred at 30°C for 1.5 hours. Subsequently, the pH was adjusted to 1 with concentrated hydrochloric acid (12 mol/L) and extracted with ethyl acetate (4 x 100 mL). The organic phases were combined and saturated aqueous sodium thiosulfate (200 mL) was added and stirred for 1 hour to remove residual peroxide. After separation of the organic phase, the aqueous phase was again extracted with ethyl acetate (1 x 100 mL). All organic phases were combined, dried and concentrated with anhydrous magnesium sulfate. Finally, the residue was purified by column chromatography (eluent was petroleum ether/ethyl acetate, 15:1, v/v) to afford 10.3 g of a light yellow oily liquid (Intermediate C-1a) in 45% yield and recovered 4.3 g of o-fluorophenol.The NMR hydrogen spectral (300 MHz, CDCl3) data for the Intermediate C-1a were as follows:δ 6.63-6.45 (3H, m), δ 120.3 (d, J = 15.5 Hz), 111.6 (d, J = 2.6 Hz), 108.1 (d, J = 18.4 Hz). | [References]
[1] European Journal of Organic Chemistry, 2016, vol. 2016, # 7, p. 1429 - 1438
[2] Patent: CN104557654, 2017, B. Location in patent: Paragraph 0091-0093
[3] Tetrahedron Letters, 2005, vol. 46, # 19, p. 3357 - 3358
[4] Tetrahedron Letters, 2014, vol. 55, # 15, p. 2426 - 2429
[5] Patent: CN102850335, 2017, B. Location in patent: Paragraph 0018-0019 |
|
|