| Identification | More | [Name]
Trimethoxyoctylsilane | [CAS]
3069-40-7 | [Synonyms]
1-TRIMETHOXYSILYL OCTANE
N-OCTYLTRIMETHOXYSILANE
n-Octyltrimethoxysilane(1-Trimethoxysilyl octane)
OCTYLTRIMETHOXYSILANE
TRIMETHOXY-OCTYLSILANE
covasils
Silane, trimethoxyoctyl-
TRIMETHOXYCAPRYLYLSILANE
Trimethoxyoctylsilan
N-OCTYLTRIMETHOXYSILANE: TECH., 90%
n-Octyltrimethoxysilane, 97+% | [EINECS(EC#)]
221-338-7 | [Molecular Formula]
C11H26O3Si | [MDL Number]
MFCD00043053 | [Molecular Weight]
234.41 | [MOL File]
3069-40-7.mol |
| Chemical Properties | Back Directory | [Appearance]
Colorless transparent liquid | [Boiling point ]
75 °C | [density ]
0.907 g/mL at 25 °C(lit.)
| [vapor pressure ]
0-12790Pa at 20-25℃ | [refractive index ]
n20/D 1.416(lit.)
| [Fp ]
216 °F
| [storage temp. ]
Keep in dark place,Inert atmosphere,Room temperature | [solubility ]
Soluble in common non-polar organic solvent. | [form ]
Liquid | [color ]
Colorless to yellow | [Specific Gravity]
0.907 | [Water Solubility ]
59-1000g/L at 20℃ | [Hydrolytic Sensitivity]
7: reacts slowly with moisture/water | [Sensitive ]
Moisture Sensitive | [BRN ]
1926957 | [InChIKey]
NMEPHPOFYLLFTK-UHFFFAOYSA-N | [LogP]
-0.82-3.9 at 20-24℃ | [CAS DataBase Reference]
3069-40-7(CAS DataBase Reference) | [NIST Chemistry Reference]
N-Octyltrimethoxysilane(3069-40-7) | [EPA Substance Registry System]
3069-40-7(EPA Substance) |
| Safety Data | Back Directory | [Risk Statements ]
R36/38:Irritating to eyes and skin . | [Safety Statements ]
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S24/25:Avoid contact with skin and eyes . | [RIDADR ]
UN2924 | [WGK Germany ]
1
| [F ]
21 | [TSCA ]
No | [HazardClass ]
3 | [PackingGroup ]
III | [HS Code ]
29319090 |
| Hazard Information | Back Directory | [Chemical Properties]
Colorless transparent liquid | [Uses]
Trimethoxy(octyl)silane is a surface modifier used as additive for polymer encapsulation and for controlled drug delivery. | [General Description]
Trimethoxy(octyl)silane is an organosilane. The effect of hydrolyzed silane on the penetration of water into a lamellar liquid crystal was studied. | [Flammability and Explosibility]
Notclassified | [Synthesis]
GENERAL STEPS: All catalytic reactions were carried out in 10 mL flat-bottomed tubes without inert gas protection. 1-Octene (4.0 mmol) was added to the dry reaction tube with an appropriate amount of catalyst and stirred for 5 minutes. Subsequently, trimethoxysilane (4.4 mmol) was added and the reaction mixture was heated to a set temperature and stirred for the indicated time. After completion of the reaction, it was cooled to room temperature. The product phase was separated by decantation, and the conversion of 1-octene and the selectivity of octyltrimethoxysilane were analyzed using an Agilent 26890N/59731 GC-MS system equipped with a DB-5 column (30 m × 2.5 mm × 0.25 μm). The 1H NMR (400 MHz) and 13C NMR (100.6 MHz) spectra of the products were recorded on a Bruker Advance spectrometer using tetramethylsilane (TMS) as an internal standard and the solvents were methanol-d4 or DMSO-d6. | [References]
[1] Angewandte Chemie - International Edition, 2016, vol. 55, # 40, p. 12295 - 12299
[2] Angew. Chem., 2016, vol. 128, p. 12483 - 12487,5
[3] Journal of Organometallic Chemistry, 2014, vol. 765, p. 59 - 63
[4] Patent: US2017/260215, 2017, A1. Location in patent: Paragraph 0239; 0243
[5] Angewandte Chemie - International Edition, 2015, vol. 54, # 48, p. 14523 - 14526 |
|
|