Identification | More | [Name]
4-(Trifluoromethyl)cinnamic acid | [CAS]
16642-92-5 | [Synonyms]
3-(4-TRIFLUOROMETHYLPHENYL)ACRYLYC ACID 4-(TRIFLUOROMETHYL)CINNAMIC ACID PTF-CNA RARECHEM BK HW 0019 TRANS-4-(TRIFLUOROMETHYL)CINNAMIC ACID TRANS-P-(TRIFLUOROMETHYL)CINNAMIC ACID 4-Trifluoromethylcinnamic 4-(Trifluoromethyl)cinnamic acid 98% 4-(Trifluoromethyl)cinnamicacid98% p-(Trifluoromethyl)cinnamic acid 3-(4-TRIFLUOROMETHYL-PHENYL)-ACRYLIC ACID (E)-4-(Trifluoromethyl)cinnamic acid | [EINECS(EC#)]
605-440-2 | [Molecular Formula]
C10H7F3O2 | [MDL Number]
MFCD00002696 | [Molecular Weight]
216.16 | [MOL File]
16642-92-5.mol |
Chemical Properties | Back Directory | [Appearance]
white crystalline powder | [Melting point ]
231-233 °C(lit.) | [Boiling point ]
279.2±35.0 °C(Predicted) | [density ]
1.3275 (estimate) | [storage temp. ]
Sealed in dry,Room Temperature | [solubility ]
Soluble in Chloroform,Dichloromethane,Ethyl Acetate,DMSO,Acetone,etc. | [form ]
powder to crystal | [pka]
4.21±0.10(Predicted) | [color ]
White to Almost white | [BRN ]
2452800 | [InChI]
InChI=1S/C10H7F3O2/c11-10(12,13)8-4-1-7(2-5-8)3-6-9(14)15/h1-6H,(H,14,15)/b6-3+ | [InChIKey]
ANRMAUMHJREENI-ZZXKWVIFSA-N | [SMILES]
C(O)(=O)/C=C/C1=CC=C(C(F)(F)F)C=C1 | [CAS DataBase Reference]
16642-92-5(CAS DataBase Reference) |
Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . S37/39:Wear suitable gloves and eye/face protection . | [WGK Germany ]
3
| [Hazard Note ]
Irritant | [HazardClass ]
IRRITANT | [HS Code ]
29163990 |
Hazard Information | Back Directory | [Chemical Properties]
white crystalline powder | [Uses]
trans-4-(Trifluoromethyl)cinnamic acid has been employed as internal standard for the determination of A77 1726 (2-cyano-3-hydroxy-N-[4-(trifluoromethyl)phenyl]-2-butenamide) in plasma by HPLC. | [Definition]
ChEBI: (E)-4-(trifluoromethyl)cinnamic acid is a member of the class of (trifluoromethyl)benzenes consisting of trans-cinnamic acid having a trifluoromethyl substituent at the para-position. It is a member of cinnamic acids and a member of (trifluoromethyl)benzenes. It is functionally related to a trans-cinnamic acid. | [Synthesis]
Step A. Synthesis of (E)-4-trifluoromethylcinnamic acid
1. In 30 mL of pyridine, 4-trifluoromethylbenzaldehyde (7.7 mL, 57.7 mmol), malonic acid (12.0 g, 115.4 mmol), and piperidine (0.567 μL, 5.75 mmol) were mixed, and the reaction was stirred for 18 hr at 70°C.
2. After completion of the reaction, the reaction solution was cooled to room temperature, water (300 mL) was added, and the pH was adjusted to 4 with concentrated hydrochloric acid (litmus paper test), and a precipitate was precipitated.
3. The solid product was collected by filtration and washed with water until the filtrate was neutral.
4. The solid product was dried under vacuum to obtain (E)-4-trifluoromethylcinnamic acid in white powder form (10a, 11.2 g, 90% yield).
1H NMR (400 MHz, DMSO-d6) δ (ppm): 12.60 (bs, 1H), 7.92 (d, 2H, J = 8.2 Hz), 7.77 (d, 2H, J = 8.2 Hz), 7.66 (d, 1H, J = 16.0 Hz), 6.70 (d, 1H, J = 16.0 Hz).
Step B. Amplified synthesis of (E)-4-trifluoromethylcinnamic acid
1. In a 2L four-necked round-bottomed flask equipped with an air condenser, an argon inlet, a mechanical stirrer, a thermocouple, and a stopper, 4-trifluoromethylbenzaldehyde (250 g, 196.2 mL, 1.44 mol), malonic acid (302.6 g, 2.87 mol), and pyridine (750 mL) were added.
2. The reaction was initially exothermic to 38-40 °C and maintained for 30 min. Piperidine (14.202 mL, 143.58 mmol) was then added, again exothermic, and the temperature rose to 42 °C after about 10 min.
3. After stirring for 30 minutes, the reaction was heated to 60 °C for 18 hours (overnight).
4. Confirm completion of the reaction by TLC, cool to about 40 °C, slowly add water (2 L to prevent freezing of the reaction mixture), continue to cool to room temperature, and dilute to a total volume of 6 L with additional water.
5. Adjust pH to 2.0-3.0 with concentrated hydrochloric acid (~675-700mL), stir for 30 minutes, filter to collect white solid.
6. Wash the filter cake with water until the filtrate is neutral (pH ca. 5.5-6, water consumption ca. 2.5 L), air dry in a Brinell's funnel for 2 hr, then dry in a vacuum oven at 60 °C overnight to obtain (E)-4-trifluoromethylcinnamic acid in the form of a white solid (10a, 300.5 g, 96% yield). | [References]
[1] European Journal of Medicinal Chemistry, 2018, vol. 149, p. 56 - 68 [2] Patent: US2007/259936, 2007, A1. Location in patent: Page/Page column 166-167; 171 [3] Journal of Medicinal Chemistry, 2015, vol. 58, # 9, p. 3859 - 3874 [4] Molecular Crystals and Liquid Crystals, 2010, vol. 528, p. 138 - 146 [5] Tetrahedron Letters, 2011, vol. 52, # 38, p. 4906 - 4910 |
|
|