Wang resin

Modify Date: 2024-01-08 19:32:56

Wang resin structure	Common Name	Wang resin
	CAS Number	201058-08-4	Molecular Weight	228.28600
	Density	1.117 g/cm3	Boiling Point	386.2oC at 760 mmHg
	Molecular Formula	C15H16O2	Melting Point	N/A
	MSDS	N/A	Flash Point	175.2oC

Purity		Quantity		Budget		Inquiry

• Properties

• Spectrum

---

 Names

Name	{4-[(4-Methylbenzyl)oxy]phenyl}methanol
Synonym	More Synonyms

 Chemical & Physical Properties

Density	1.117 g/cm3
Boiling Point	386.2oC at 760 mmHg
Molecular Formula	C15H16O2
Molecular Weight	228.28600
Flash Point	175.2oC
Exact Mass	228.11500
PSA	29.46000
LogP	3.06630
Vapour Pressure	1.18E-06mmHg at 25°C
Index of Refraction	1.587

 MSDS

Name:Wang resin grain size 200-400 mesh Material Safety Data SheetSynonym:4-Hydroxymethyl-phenoxymethyl-copoly(styrene 1% divinylbenzene)resiCAS:201058-08-4Section 1 - Chemical Product MSDS Name:Wang resin grain size 200-400 mesh Material Safety Data Sheet Synonym:4-Hydroxymethyl-phenoxymethyl-copoly(styrene 1% divinylbenzene)resi Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS CAS#Chemical NamecontentEINECS#201058-08-4Wang resinunlistedHazard Symbols: None Listed. Risk Phrases: None Listed. Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Not available. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. May be harmful if absorbed through the skin. Ingestion: May cause irritation of the digestive tract. May be harmful if swallowed. Inhalation: May cause respiratory tract irritation. May be harmful if inhaled. Chronic: Not available. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Get medical aid. Wash mouth out with water. Inhalation: Remove from exposure and move to fresh air immediately. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Section 7 - HANDLING and STORAGE Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Storage: Store in a cool, dry place. Store in a tightly closed container. Keep refrigerated. (Store below 4C/39F.) Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 201058-08-4: Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: white Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: Not available. Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: Molecular Weight: Section 10 - STABILITY AND REACTIVITY Chemical Stability: Not available. Conditions to Avoid: Incompatible materials. Incompatibilities with Other Materials: Strong oxidizing agents. Hazardous Decomposition Products: Carbon monoxide, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 201058-08-4 unlisted. LD50/LC50: Not available. Carcinogenicity: Wang resin - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA No information available. IMO No information available. RID/ADR No information available. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: Not available. Risk Phrases: Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 201058-08-4: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 201058-08-4 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 201058-08-4 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A

 Safety Information

Hazard Codes	Xn: Harmful;
Safety Phrases	S24/25
HS Code	3909400000

Company Profile

     Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. 

     We are committed to providing high-quality chemical products and comprehensive solutions to meet the diverse needs of the global market.

     Our research and development team possesses profound professional knowledge and extensive industry experience, dedicated to developing cutting-edge chemical materials to drive technological progress and industrial development. Our production facilities are equipped with state-of-the-art technology and a stringent quality control system to ensure product consistency and reliability.

     As a pioneer in the industry, we not only offer standardized products but also customize chemicals and services according to the specific needs of our customers. Our goal is to become a trusted partner for global customers through continuous technological innovation and superior customer service.

Our Advantage

Quality control

Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.

Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Technological innovation

Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.

Competitiveness

Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.

Word of mouth

Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.

Rich experience

Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.

Safe and fast delivery

We will arrange shipment of spot products as soon as we receive payment.

Customized products are determined based on the synthesis time of different products.

Excellent pre-sales and after-sales service

Pre sales:

We are committed to providing the most favorable quotes and detailed information about our products and company.

After-sale service:

We assist buyers in customs clearance by providing necessary documents and information.

If there is any dispute over product quality, we are committed to providing the best solution.

Our packaging and shipping

? Packaging: 

1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.

? Shipping

? Delivery:

Within 7 days after receiving your payment

Contact information

For more details, pls contact us freely.

Email: jiuyitime@fdachem.com

 Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!